Chứng nhận của chúng tôi

Dịch vụ tin cậy & khách hàng chính

Tham quan nhà máy & Khách hàng đến thăm

Featured Customer Cases

Frequently Asked Questions

1.What is the gold recovery rate for low-grade gold ore processing?

Đối với quặng vàng hàm lượng thấp (1–3 g/t), quy trình tách trọng lực + xyanua hóa của chúng tôi có thể đạt tỷ lệ thu hồi vàng 85%–92%, tùy thuộc vào thành phần quặng như hàm lượng lưu huỳnh.

2.Can a rotary kiln be used for spodumene (lithium) conversion? What is the temperature accuracy?

Có. Lò quay nhiệt độ cao của chúng tôi được thiết kế cho quá trình chuyển hóa spodumene α→β, vận hành ở 1100°C ±10°C với hệ thống điều khiển đa vùng, đạt tỷ lệ chuyển hóa trên 96%.

3.What equipment is required for copper ore beneficiation, and what is the investment for a 500 TPD plant?

Thiết bị chính bao gồm máy nghiền hàm, máy nghiền bi, tế bào tuyển nổi và máy làm đặc. Một nhà máy đồng 500 TPD có chi phí khoảng 2–3 triệu USD (không bao gồm công trình dân dụng), tùy thuộc vào đặc tính quặng.

4.How much can iron ore grade be improved after magnetic separation? What about energy consumption?

With high-gradient magnetic separation and reverse flotation, iron grade can reach 65%–68%. Energy consumption is about 18–22 kWh per ton, and waste heat recovery systems can reduce energy use.

5.Rotary kiln or shaft kiln for zinc oxide ore calcination? What is the recovery rate?

A rotary kiln is preferred due to better temperature uniformity. Zinc recovery can reach 88%–92%, with residue zinc content below 2%.

6.How fine can your grinding equipment produce? Is it suitable for graphite anode materials?

Máy nghiền đứng của chúng tôi có thể đạt độ mịn lên tới 2500 mesh (D97). Thiết bị phù hợp để chế biến than chì dạng cầu với độ cầu ≥0,9 và khối lượng riêng sau đầm ≥1,1 g/cm³, đáp ứng yêu cầu cấp pin.

7.What environmental measures are used in silver cyanide leaching plants?

We provide closed leaching systems, online cyanide monitoring (0.1 ppm accuracy), and tailings detoxification to ensure compliance with hazardous waste standards (GB 18598).

8.What is the fuel consumption of an alumina bauxite rotary kiln, and what size is needed for 2000 TPD?

Fuel consumption is about 75–85 m³ of natural gas per ton. A Φ4.8×74m rotary kiln with a six-stage preheater is recommended for 2000 TPD capacity.

Boost Your Mining Efficiency With Complete Solutions

Zhongyi team provides tailored mineral processing and production line solutions to optimize efficiency and reduce costs.